News News
Product / Products

Tel: 13392238516


Fax: 86-757-81825080

China · Guangdong · Foshan

Add: Foshan Nanhai Dali caobian Tongqing Road West No. 6

1) work environment· machinery should be installed to prevent the damage caused by broken saw blades and broken pieces.The disconnection is not allowed near the premises.• workplaces should be kept away from inflammable and explosive materials.Clothing, protective equipmentThe operator must wear protective glasses to prevent damage from sawblade damage and debris flying.The operator must be careful not to wear gloves or gloves. Long hair should be placed in the work cap to prevent the risk of being sucked into the machine.3) preparation before use· make sure the machine is in good co...
Delivery time: 2013 - 12 - 11
Cutting discThe cutting piece is part of the grinding wheel, which is made of abrasive and binder resin for ordinary steel, stainless steel metal and non-metallic wafer.useBy glass fiber and resin enhanced materials, has a high tensile strength, impact and flexural strength, are widely used in ordinary steel, stainless steel metal and non-metallic materials production, excellent material, exquisite craft, guarantees the artifacts of different materials of high cutting efficiency and the best economic effect.classificationThe cutting film is divided into fiber resin cut and diamond slices accor...
Delivery time: 2017 - 05 - 03
Toothless saw is introducedToothless saw, electric tool is a wrought iron processing, it can be used to cut off the iron profiles, etc., also can cut all kinds of hybrid material, this is a simple but use are widely used in industrial machinery.Toothless saw blade specification:300 * 2.8 * 32.Toothless saw blade shape:Class round knife, long knife, curved knife, tooth shape knife, disc shaped knife, shaped knife, trapezoid knife, corrugated knife, boot knife, tooth knife.Toothless saw blade selection material:The LD, SKD, Cr12Mov, SHH, skh-9, skd-11 materials are targeted.No-toothed saw safety...
Delivery time: 2017 - 05 - 03
The selection basis of the saw bladeClassification of material attributes according to sawingReal wood: cut and cut vertically.Crosscutting need to cut the wood fibre, aspect demand level off, can't have a knife, and there can be no burr, the saw blade used in the outer diameter of 10 or 12 inches and teeth should be 60 to 120 tooth, the thinner material using the more teeth machine accordingly. Feed speed also need to be slow. The number of teeth on the slitting saws is relatively small, feeding speed will be faster, so very tall to the requirement of chip removal, so the requirements of ...
Delivery time: 2017 - 05 - 03
A, definitions,Chain saw is also called the chain saw, hand saw powered by gasoline engine, it is mainly used for logging and building material, its working principle is to rely on interlaced L saw chain blade lateral movement for shear actionSecond, the speciesChain saw is a kind of broken device, which can be divided into motor chain saw, non-motor chain saw, concrete chain saw, etc.Three, notice the matterAlways check the chain tension, turn off the engine when checking and adjust, and wear protective gloves. A good condition is that when the chain is attached to the bottom of the guide pla...
Delivery time: 2017 - 03 - 16
Add: Foshan Nanhai Dali caobian Tongqing Road West No. 6
TEL: 13392238516
传真:+86 0755-2788 8009
Copyright ©2017 - 2020 Foshan Nanhai Tang Lixin Hardware Tool Co., Ltd.










  • 13392238516