News News
Product / Products
Contact

Tel: 13392238516

E-mail: 3543296267@qq.com

Fax: 86-757-81825080

China · Guangdong · Foshan

Add: Foshan Nanhai Dali caobian Tongqing Road West No. 6

Safety precautions are used for the use of alloy saw blades

Date: 2013-12-11
Views: 73

1) work environment

· machinery should be installed to prevent the damage caused by broken saw blades and broken pieces.

The disconnection is not allowed near the premises.

• workplaces should be kept away from inflammable and explosive materials.

Clothing, protective equipment

The operator must wear protective glasses to prevent damage from sawblade damage and debris flying.

The operator must be careful not to wear gloves or gloves. Long hair should be placed in the work cap to prevent the risk of being sucked into the machine.

3) preparation before use

· make sure the machine is in good condition, no deformation, no vibration, no axial tolerance is h7.

· check for the abnormal phenomena such as loss, shedding, abnormal abrasion and the bending, distortion and rupture of the frame, in case the saw blade is broken and fly away.

Make sure that the selected saw blade is suitable for cutting, prevent the abnormal abrasion, shedding, bad cutting and overheating of the saw blade. If an error is chosen, the saw blade and the material are broken, the pieces are scattered, and the accident occurs.

4) installation

· make sure the blade is turning in the direction of the main axis of the machine. If the direction is reversed, the blade will fall off, the debris will fly, and an accident will occur.

Choose inside diameter is consistent with the saw blade for a third saw blade diameter, diameter slightly larger (1/2) blade saw more appropriate USES saw blade diameter of flange, convinced that no abnormal abrasion, clean with no exception, the bending deformation, surface adhesion.

· make sure there is no big clearance between the inner diameter of the saw blade and the diameter of the machine, and install the flange and tighten the nut.

Before homework, make sure no one is in front of the blade. Then, the machine has no vibration, no horizontal and radial oscillation of the saw blade.

The reprocessing of saw blade (internal diameter modification, locating hole processing etc.) must be carried out by the manufacturer. If processed, it can affect product use and can be dangerous.

· when installing, the saw blade is better than the plate 5-6.

5) use of

When used, the cutting material needs to be fixed, so as not to cause an abnormal cut, which can cause the saw blade to be broken, the shards scattered, and the accident occurred.

· when using, it is necessary to terminate the operation, to check and troubleshoot the problem when the sound and vibration are abnormal and the cutting surface is rough and bending. If you continue to use it, it will cause the saw blade to be broken, the debris will fly away and the accident will happen.

6) after use

· when the saw blade is no longer sharp and cut face rough, it must be reground in time. Otherwise, it will affect the use effect and may cause the sawblade to be scrapped.


Latest news / News More>
1
2013 - 12 - 11
1) work environment· machinery should be installed to prevent the damage caused by broken saw blades and broken pieces.The disconnection is not allowed near the premises.• workplaces should be kept away from inflammable and explosive materials.Clothing, protective equipmentThe operator must wear protective glasses to prevent damage from sawblade damage and debris flying.The operator must be careful not to wear gloves or gloves. Long hair should be placed in the work cap to prevent the risk of being sucked into the machine.3) preparation before use· make sure the machine is in good co...
2
2017 - 05 - 03
Toothless saw is introducedToothless saw, electric tool is a wrought iron processing, it can be used to cut off the iron profiles, etc., also can cut all kinds of hybrid material, this is a simple but use are widely used in industrial machinery.Toothless saw blade specification:300 * 2.8 * 32.Toothless saw blade shape:Class round knife, long knife, curved knife, tooth shape knife, disc shaped knife, shaped knife, trapezoid knife, corrugated knife, boot knife, tooth knife.Toothless saw blade selection material:The LD, SKD, Cr12Mov, SHH, skh-9, skd-11 materials are targeted.No-toothed saw safety...
3
2017 - 05 - 03
Cutting discThe cutting piece is part of the grinding wheel, which is made of abrasive and binder resin for ordinary steel, stainless steel metal and non-metallic wafer.useBy glass fiber and resin enhanced materials, has a high tensile strength, impact and flexural strength, are widely used in ordinary steel, stainless steel metal and non-metallic materials production, excellent material, exquisite craft, guarantees the artifacts of different materials of high cutting efficiency and the best economic effect.classificationThe cutting film is divided into fiber resin cut and diamond slices accor...
4
2017 - 03 - 16
Foshan Nanhai Tangli New Hardware tools Co.,Ltd. is specialized is engaged in the production of cemented carbide circular saw blades,design and manufacture carpenter,shoes,aluminium tools such as professional manufacture.The company is a Sino-Australia joint venture enterprise specializing in production of hard alloy circular saw blades and design & manufacturing of woodworking, shoe materials, aluminum, etc. It has introduced world-leading Germany complete sets of professional circular saw blade production equipment which adopt Luxembourg hard alloy, Japan steel and other imported high-qu...
5
2017 - 03 - 16
A, definitions,Chain saw is also called the chain saw, hand saw powered by gasoline engine, it is mainly used for logging and building material, its working principle is to rely on interlaced L saw chain blade lateral movement for shear actionSecond, the speciesChain saw is a kind of broken device, which can be divided into motor chain saw, non-motor chain saw, concrete chain saw, etc.Three, notice the matterAlways check the chain tension, turn off the engine when checking and adjust, and wear protective gloves. A good condition is that when the chain is attached to the bottom of the guide pla...
6
2017 - 05 - 03
The selection basis of the saw bladeClassification of material attributes according to sawingReal wood: cut and cut vertically.Crosscutting need to cut the wood fibre, aspect demand level off, can't have a knife, and there can be no burr, the saw blade used in the outer diameter of 10 or 12 inches and teeth should be 60 to 120 tooth, the thinner material using the more teeth machine accordingly. Feed speed also need to be slow. The number of teeth on the slitting saws is relatively small, feeding speed will be faster, so very tall to the requirement of chip removal, so the requirements of ...
Add: Foshan Nanhai Dali caobian Tongqing Road West No. 6
TEL: 13392238516
传真:+86 0755-2788 8009
邮编:330520
Copyright ©2017 - 2020 Foshan Nanhai Tang Lixin Hardware Tool Co., Ltd.
犀牛云提供企业云服务
X
1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

5

电话号码管理

  • 13392238516
6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开