Toothless saw is introduced
Toothless saw, electric tool is a wrought iron processing, it can be used to cut off the iron profiles, etc., also can cut all kinds of hybrid material, this is a simple but use are widely used in industrial machinery.
Toothless saw blade specification:
300 * 2.8 * 32.
Toothless saw blade shape:
Class round knife, long knife, curved knife, tooth shape knife, disc shaped knife, shaped knife, trapezoid knife, corrugated knife, boot knife, tooth knife.
Toothless saw blade selection material:
The LD, SKD, Cr12Mov, SHH, skh-9, skd-11 materials are targeted.
No-toothed saw safety procedure
What about this toothless saw? An electric tool commonly used in the machining of iron art, which is used to cut off iron wire, pipe and section. It is easy to cut all kinds of composite materials including steel, copper, aluminum, wood and so on. Used in emergency rescue to cut wood, plastic, iron, etc. Toothless saw is no teeth can realize "saw" the function of the equipment, is a kind of simple mechanical, the main body of a grinding wheel is an electric motor and can be directly on the motor shaft by belt connection or fixed. Cutting process is through high-speed rotating grinding wheel piece, using the grinding wheel Angle cutting objects of particles, wear particles fall at the same time, the new sharp particles, using the grinding wheel wear cutting. Here is a guide for the safety of toothless saws:
Workers should ensure that the protection is fully clothed and protected by protective goggles or masks.
Before the no-toothed saw is used, check whether the parts are loose and the saw blade is broken.
The non-toothed saw safety cover should be strong and reliable.
The use of a non-toothed saw must be used with a leakage protector.
When the toothless saw is not needed, the power supply should be cut off in time.
The saw should be held steady, the clamping is firm, the saw must not exceed the prescribed scope. Do not use foot to step on saws.
Before the start of the toothed saw, it is not allowed to contact the saw with the saw, and the force of the sawing is not too hard and not too hard, and the cutting process must not be stopped.
The replacement and management of non-toothed saw blades must be responsible for the personnel, and the shaft hole is not suitable for unforced installation.
When replacing the saw blade, the power supply must be cut off, and the operation will be done after complete stop and plug in.
10, saw blade storage is forbidden to be together with metal, pay attention to waterproof, moistureproof, antifreeze, easy to carry when carrying.
No toothed saw blades wear and tear and should be replaced immediately.
The toothless saw should be inspected regularly, and the application should be scrapped in time for the abnormal use.
No failure or damage of the toothed saw, please send professional or special maintenance department for repair.